Tufted sleigh bed king is a good sleep solution for a child or for a small or guest bedroom. The mattress of a double bed measures 39 by 75 inches, so a single bed can be placed in a relatively small area. In addition, due to the options its small size provides, two single beds can serve a double function in some rooms. You have three options when you create a double bed. The first is to use a mattress and mattress set. The beds provide extra support for the mattress, as well as adding a considerable height to the bed. This additional height can make the bed easier to get in and out of, but you have to design the bed with this in mind. Otherwise, the bed may end up too high for added comfort. If you use the box springs, you will generally build a lower frame and run a few slats between the side rails to support the box.
The second option uses only a mattress. You put many battens between the side rails, almost enough to make a solid platform under the mattress, then put the mattress on top of them. In the past, builders create a similar effect by using a wire mesh securely attached to the frame. Still, the slats are the preferred method, since the mesh sometimes falls in the middle. The third option uses a literal platform, and is usually called a platform bed. This is usually the simplest technique, and then fixes it to the tufted sleigh bed king base. The result is a very sturdy bed.
12 Photos Gallery of: Tufted Sleigh Bed King Design
The standard tufted sleigh bed king frame has four main parts: a headboard, a footboard and two side rails that connect the two. Each of the side rails has a smaller rail on its inner surface; this is why it has a ridge to support the rails or platforms. If you are going to need to dismantle the bed frequently, you may want to invest in commercial rail mounting hardware. In this way, you can easily disconnect the rails from the endboards for transport and reassemble with the same ease. Otherwise, you only have to screw the rails to the endboards.Tags: king bed sturdy beige tufted